The Lincoln Electric Co.
Ehstoday 7363 Eye Face Protection 6
Ehstoday 7363 Eye Face Protection 6
Ehstoday 7363 Eye Face Protection 6
Ehstoday 7363 Eye Face Protection 6
Ehstoday 7363 Eye Face Protection 6

Eye and Face Protection: Tips for Choosing the Right AutoDarkening Welding Helmet

Aug. 9, 2017
Helmets today are more functional than ever, can accommodate a welder’s specific needs and even offer some cool graphics. Still, they must meet strict safety standards.

A welding helmet, commonly referred to as a “hood,” is one of the most important pieces of personal protective equipment that a welder must have. An adequate helmet protects the eyes and skin not only from severe sparks, but also from potentially vision-damaging ultraviolet and infrared rays emitted by the arc.

As one of the most visible pieces of safety attire, a welding helmet also gives wearers an opportunity to add a bit of personal flair to their welding gear. With this is mind, today’s welding helmets are available in a wide range of colors and graphics. These visual features command attention, but a helmet’s protective features – combined with comfort considerations – are what welders should consider when selecting the right helmet for their needs. A welding helmet should be lightweight and well-balanced to ensure that it can worn comfortably for a full day’s work, providing flexible adjustments while protecting their eyes and face from spatter and sparks and harmful light rays.

Today’s helmets considerably are more functional than those of even 10 or 15 years ago. They are designed to accommodate a welder’s specific needs on any job. All, including the most inexpensive, must meet strict safety standards across the globe. In the United States, that standard is ANSI Z87.1 and in Canada it is CAN/CSA Z94.3. These standards address such concerns as light leakage and flame and impact resistance.

Passive Helmets

Some welders, particularly many professional pipe welders, still opt to wear conventional welding helmets with a traditional glass lens and fixed shade, which remains darkened at all times. While these helmets do provide rugged and inexpensive safety protection, they also have a few disadvantages.

Welding helmets featuring a fixed shade can be more difficult to use because a welder has to lift the helmet every time he or she wants to examine the weldment and joint, set a position and prepare for welding and then flip the helmet down again when it’s time to strike the arc. This repetitive process can cause neck strain after a full day’s work and reduces the operators’ productivity. Additionally, in tight or restricted spaces, it can be difficult to move the helmet up or down.

For less-experienced welders, it can be difficult to keep the MIG gun, TIG torch or stick electrode in the correct position to begin welding in the joint after the helmet is lowered into place. Poor arc starts can result in weld defects, something any welder obviously wants to avoid.

Auto-Darkening Protection

One option available to welders are the more advanced auto-darkening helmets, which automatically adjust the shade from an inactive state (light) to an active state (dark) when an arc is initiated. These helmets protect from harmful light emissions at all times and darken to the pre-selected shade in milliseconds, thanks to quick-changing LCD (liquid crystal display) technology in the auto-darkening cartridges.

With auto-darkening helmets, welders can see clearly while the helmet is in the down position, allowing for quick material set-up and positioning with the hood in place to begin welding. These helmets increase welder productivity as they eliminate unnecessary stop-and-start times and the need for welders to readjust the helmet and set up positioning.

Selection Considerations

So what are the most important factors to consider when selecting an auto-darkening helmet? Quality? Control? Safety? Style? There are a number of general selection considerations that will help welders choose a helmet that best meets their needs, as well as finding one that comfortably can be worn all day long.

When assessing various auto-darkening helmets, look for models that have a full-coverage shell that was designed to reflect spatter and resist impact forces. The helmet also should comply with ANSI Z87.1 and CSA Z94.3 standards. This ensures that it was designed with North American safety standards in mind. Another safety feature to look for is a “test” mode that is integrated into the auto darkening lens. This allows the operator to check if the helmet is working correctly before initiating an arc.

The helmet’s viewing size also is a major factor to consider. While it is based on preference, a large viewing area increases the operators’ peripheral vision and can be very helpful when working on large weld assemblies.

A new specification to review is the color spectrum of the auto-darkening lens. In the past, auto-darkening helmets have had a lime green color spectrum. Recently, a few manufacturers have developed technology which alters the lenses color spectrum to give the operators a more natural view. This feature can improve the welders’ ability to control the weld puddle and reduce eye fatigue.

Another important specification to review is the helmets’ variable shade range. Entry-level, auto-darkening helmets normally allow the user to toggle between shades 9 through 13 while premium helmets offer a wider 5 through 13 range. This scale allows welders to optimize the shade for greater comfort on any given application. Anyone who moves between applications; requires changes in welding machine voltage; amperage or wire feed speed settings or changes between welding processes can benefit from this flexibility. For example, welding on thick materials at high amperages generally requires higher shade levels. Low-amperage MIG welding or plasma cutting is best performed with low-shade levels to assure adequate visibility of the arc.

Delay controls can be used to lengthen or shorten the amount of time it takes for the helmet to return to the light state following the completion of a weld. This can be helpful when tack welding, when the weld duration is short and the operator plans to move quickly. On the other hand, performing lengthy welds on thick materials may require that the delay be set for longer periods of time so that the operator does not have to view the larger, hotter weld nugget at the end of the weld until it has cooled for a second or two. Generally, delay can be set for 0.1 second up to 1.0 second.Some helmet models also allow the user to control delay and sensitivity. Modifying the helmet’s arc sensitivity helps to assure it will darken as the user desires. For example, if there are other welders operating very close by, the helmet’s arc sensor sensitivity can be reduced to help prevent triggering or darkening when those nearby welders strike their own arc.

Count the number of arc sensors on the helmet. Some auto-darkening helmets have one or two arc sensors, while others can have up to four arc sensors. With more arc sensors, there is less chance that the helmet will fail to darken as necessary.

Auto-darkening helmets feature either external or internal controls for functions like shade or grind control. Both have advantages and disadvantages, depending on your requirements. The external controls add convenience, allowing some adjustments to be made while the helmet is on the head. On the other hand, external controls include additional wiring and can be exposed to additional impacts or damage as they are positioned on the outside of the helmet. Internal controls positioned on the lens cartridge are more protected and do not require external wiring. However, almost every adjustment will require removing the helmet to change settings.

Auto-darkening helmets are powered in different ways. Some feature replaceable lithium batteries. Others use a combination of solar cells with user-replaceable lithium batteries, while other models feature solar power with a battery assist. Any of these methods work well. The choice comes down to personal preference.

Helmets with user-replaceable batteries offer the potential for longer total service life of the helmet as those with non-user replaceable batteries generally are anticipated to have a service life of five to seven years. On the other hand, users handling models with replaceable batteries are advised to have replacement batteries on hand. If the helmet has an on/off switch, the user must remember to turn the helmet off after use.

For anyone involved in extensive welding, a heavy helmet significantly can increase fatigue. Newer, lightweight helmets make welding safer, easier and more comfortable. Many weigh only between 534 and 602 grams (18 to 21 ounces), even with a full-coverage shell. Some models, with smaller view sizes and more compact shells, are approaching weights as low as 13-15 ounces.

Personal Preference

Don’t forget to try a helmet on to ensure a comfortable fit. Check that the headgear adjusts up, down, forward and back. Many headgear assemblies do not include a fore/aft adjustment to set the helmet’s distance from the face. This can be a factor for welders with large heads or especially large facial features. Also, make sure the helmet can easily tighten around the head.

Workers should try on the helmets to determine if the rate of fall and degree of tilt allow them to lower in a controlled manner. Some helmets have no damping, so the helmet quickly falls into position. Others allow the user to set the resistance and therefore control the rate of fall and the end point to which the helmet stops when lowered into welding position.

Check how the helmet behaves in the upward position; does it softly lock into a detent, helping to keep it in the upward position while you work at your station? Is it well balanced in both the down and up positions, so that the helmet does not pull the user forward? Helmets with poor balance will add to neck strain and general fatigue over the course of a work shift.

Be sure to check the standard sweatband at the forehead. Is it soft and absorbent or not substantial enough to increase comfort while keeping perspiration from your eyes?

Beyond auto-darkening capabilities and easy-to-wear fit, today’s high-tech helmets can feature other options. Many models, for instance, offer magnifying “cheater” lens to help older and/or near-sighted welders to see the weld puddle with sufficient clarity. For environments requiring hard hats, as in construction and many other job site environments, some models can be equipped with an adapter that allows the user to wear both the hardhat and welding helmet for full site safety compliance while welding. 

Some auto-darkening helmets also feature grind modes, allowing the helmets to double up as grinding shields. This feature is great for weld prep or post-weld clean-up activities.

A Helmet for Everyone

Because helmets are highly visible and worn constantly on the job, they’re also a great vehicle for welders to allow their personalities to shine through at a jobsite or on the shop floor. There’s more to them than merely safety and utility.

Today’s welding helmets come in a variety of colors, not just standard black. Personalization doesn’t to stop there. Many models offer personalization kits with decals, while others come with a range of available pre-imprinted graphics, including such novelties as comic book superheroes, hot rods, flags, skulls, tattoo patterns and even polka dots, which were designed with female welders in mind.

Choosing the right helmet for your needs might at first seem daunting considering the wide variety of safety features, convenience and comfort options and personalization available. However, in this sea of choice, there is a helmet out there for every welder…and every welder’s budget.

Chase Rutti is the welding gear and tools product manager for the Lincoln Electric Co. http://www.lincolnelectric.com).

Sponsored Recommendations

3 Essential Elements for a Strong Safety Culture

March 13, 2024
Organizations globally have increased their attention on safety culture: trying to figure out what it really is and the aspects that are necessary to develop and sustain it. And...

Making the Case for Occupational Health Software

March 13, 2024
Deciding to invest in Occupational Health (OH) software can be a challenging leap for many organizations. This article will equip businesses with insightful strategies for effectively...

Fighting the Flu: Solutions for the Workplace

March 13, 2024
Seasonal flu continues to wreak considerable havoc both on individual wellness, as well as on our business continuity and productivity. Explore these solutions for protecting ...

Preventing SIFs with Digitization: Reduce Serious Injuries and Fatalities with Technology

March 13, 2024
This eBook discusses the origins of SIF prevention, outlines principles, models and tools available to EHS leaders to better detect and address SIF potential in their business...

Voice your opinion!

To join the conversation, and become an exclusive member of EHS Today, create an account today!