Ehstoday 8407 Buscrossingtracks 0
Ehstoday 8407 Buscrossingtracks 0
Ehstoday 8407 Buscrossingtracks 0
Ehstoday 8407 Buscrossingtracks 0
Ehstoday 8407 Buscrossingtracks 0

The Perfect Analogy for Electrical Safety Principles

Jan. 18, 2018
Isolating electrical energy in lockout/tagout (LOTO) is considered the riskiest task perform daily.

Driving to work last week, while pondering the many reasons companies use permanent electrical safety devices (PESDs) in their electrical safety programs, I nearly slammed into the back of a bus stopped at the railroad crossing. With a pounding heart and a rush of adrenaline, it suddenly hit me like a freight train. Both electrical energy and freight trains yield to no one. I finally stumbled across a perfect analogy for electrical safety principles. 

During a blizzard on Dec. 1, 1938, a freight train named The Flyin’ Ute collided with a school bus driven by Farrold Silcox in Sandy, Utah, killing 25 of the 39 students. In the 1920’s, the use of “motor buses” or buses, became commonplace. The public soon realized that a train colliding into a bus could be a colossal disaster.

To reduce this risk, laws governing vehicles at railroad crossings were passed and essentially have remained unchanged today. Original laws only required bus drivers stop at railroad crossings. Over time, improvements were made requiring bus drivers to check their brakes when approaching a crossing, turn on flashers, come to a complete stop 15-50 ft. from the tracks and look both ways before crossing the tracks.

Now for the rest of the story. Sadly, for the 25 students, Farrold Silcox had no idea that The Flyin’ Ute was bearing down on his bus at 60 mph. The train was unseen because of a howling blizzard, an unmarked rail crossing and Farrold did not hear the train because of the bus’s closed windows and doors. Shortly after this tragedy, the laws changed in order to give bus drivers better visibility of an oncoming train by requiring them to open the passenger door and driver side window and wait at all rail crossings.

In many ways this train story parallels the challenges of locking and tagging out unseen and unheard electrical energy because it poses the same risk — instantaneous death. Isolating electrical energy in lockout/tagout (LOTO) is considered the riskiest task perform daily. A bus stopping at the rail crossing is like the first step of a LOTO procedure: identifying the source and opening an isolator. Next, verify that “no train is coming” or, in this case, verify zero voltage. Interestingly, the minimum OSHA compliance for this task essentially is a qualified worker with a voltmeter in hand donned in personal protective equipment — the mandatory three-point voltmeter test. This is like a bus driver stopping at a rail crossing not outfitted with flashing lights and a gate.

Installing PESDs into electrical equipment is akin to adding a gate and flashing light at a rail crossing. It essentially is an additional safety measure or a secondary indication adding extra insurance that unseen and unheard electrical energy is identified before it potentially snatches lives. Opening the passenger door and driver window and checking both directions for a train is the final procedural step bus drivers perform before crossing the tracks. Likewise, PESDs used in LOTO also need procedures that bring everything together.

With millions of school buses on the road today, one rarely hears of train bus collisions like what happened years ago in Sandy, Utah. Why? Both of these safety examples discussed here have a common thread. Each requires multiple sequential failures occurring at the same time for an accident to happen — the statistical improbability of a bus driver not stopping at the right place, a gate malfunction, a warning light failure, the bus driver not seeing the oncoming train and the presence of a train.

For over a decade, PESDs also improved the safety record for thousands of companies deploying them in their electrical safety programs. In this case, a failure of the isolator, failure of the PESD device and the worker not performing the mandatory voltmeter test all have to happen for an accident to occur. Most likely, each of these safety scenarios will evolve, but one thing will never change—buses stopping at rail crossings and workers doing the mandatory voltmeter test, preferably (with PESDs reducing risk) in the presence of the energy verification provided by PESDs.

Sponsored Recommendations

3 Essential Elements for a Strong Safety Culture

March 13, 2024
Organizations globally have increased their attention on safety culture: trying to figure out what it really is and the aspects that are necessary to develop and sustain it. And...

Making the Case for Occupational Health Software

March 13, 2024
Deciding to invest in Occupational Health (OH) software can be a challenging leap for many organizations. This article will equip businesses with insightful strategies for effectively...

Fighting the Flu: Solutions for the Workplace

March 13, 2024
Seasonal flu continues to wreak considerable havoc both on individual wellness, as well as on our business continuity and productivity. Explore these solutions for protecting ...

Preventing SIFs with Digitization: Reduce Serious Injuries and Fatalities with Technology

March 13, 2024
This eBook discusses the origins of SIF prevention, outlines principles, models and tools available to EHS leaders to better detect and address SIF potential in their business...

Voice your opinion!

To join the conversation, and become an exclusive member of EHS Today, create an account today!