Occupational Exposures within Cannabis Manufacturing

Dec. 17, 2018
NIOSH entered a medical marijuana manufacturing facility to study the safety concerns associated with the industry.

The astounding rate at which the cannabis industry is growing is leaving a large compliance gap on the occupational health and safety front, according to the National Institute for Occupational Safety and Health (NIOSH).

The agency, a subset of the Centers for Disease Control and Prevention, recently visited a medical marijuana production facility that had both indoor and outdoor growing operations after a union representative raised a red flag.

A Health Hazard Evaluation Program was created after potential occupational safety hazards both in harvesting and processing were not being addressed, according to the representative.

"We evaluated a medical cannabis facility and detected cannabis components on surface wipes throughout the facility," NIOSH stated in its report. "Diacetyl and 2,3-pentanedione were identified in screening air samples, but later were not quantifiable in personal air samples. Observed fungal and endotoxin exposures can increase allergic and respiratory symptoms, which employees reported.

Facility visits were completed on August 2016 and April 2017. Investigators observed work procedures in cultivation, harvesting, processing and decarboxylation. 

Both air and surface samples were taken to measure the levels of organic compounds, and NIOSH studied fungal diversity analysis and endotoxins, which are products some bacteria release. Particle concentrations in the air also were taken during the grinding process.

Employees were interviewed about job tasks, health and safety concerns, personal protective equipment use, injuries at work, job stress, physical working conditions and psychosocial factors at work, according to the agency. 

In addition, NIOSH collected data on worker health history and respiratory symptoms and tested lung function. Results should that seven of the eight workers tested had normal results.

Workers reported the following issues to NIOSH:

  • moderate job stress due to heavy workload;
  • safety concerns related to working with high pressure carbon
  • dioxide, exit doors needing a badge to unlock for egress, ergonomics, and working with
    large amounts of solvents;
  • concerns about having to perform tasks that are not part of their
    job description; and
  • allergic, irritant, and musculoskeletal symptoms.

Despite possible exposures to diacetyl or 2,3-pentanedione, the medical marijuana facility had no written respiratory plan.

NIOSH provided the following recommendations for the employer:

  • Install local exhaust ventilation to reduce exposures during grinding operations.
  • Move the decarboxylation process to a seldom occupied area in the facility to prevent
    unnecessary exposures to diacetyl and 2,3-pentanedione.
  • Limit access to the areas where higher exposure tasks are occurring.
  • Redesign security doors to allow emergency egress without needing a badge to exit
    the facility.
  • Encourage employees to report new or ongoing symptoms to their personal healthcare
    provider and a designated health and safety representative within the workplace.
  • Develop and implement a written respiratory protection program that meets the requirements of the OSHA's respiratory protection standard.
  • Talk to employees about whether workload could be better managed and how. Clearly
    define job roles and talk to employees how to minimize role overload. If feasible, hire
    more employees to reduce the workload of individuals.

In addition, the agency stressed to workers the importance of wearing personal protective equipment as required by the company. Employees also should report any new or ongoing symptoms to a personal physician and to the designated representative within the workplace.

Sponsored Recommendations

Free Webinar: ISO 45001 – A Commitment to Occupational Health, Safety & Personal Wellness

May 30, 2024
Secure a safer and more productive workplace using proven Management Systems ISO 45001 and ISO 45003.

ISO 45003 – Psychological Health and Safety at Work

May 30, 2024
ISO 45003 offers a comprehensive framework to expand your existing occupational health and safety program, helping you mitigate psychosocial risks and promote overall employee...

DH Pace, national door and dock provider, reduces TRIR and claims with EHS solution

May 29, 2024
Find out how DH Pace moved from paper/email/excel to an EHS platform, changing their culture. They reduced TRIR from 4.8 to 1.46 and improved their ability to bid on and win contracts...

Case Study: Improve TRIR from 4+ to 1 with EHS Solution and Safety Training

May 29, 2024
Safety training and EHS solutions improve TRIR for Complete Mechanical Services, leading to increased business. Moving incidents, training, and other EHS procedures into the digital...

Voice your opinion!

To join the conversation, and become an exclusive member of EHS Today, create an account today!