Thinkstock
marijuana.jpg
marijuana.jpg
marijuana.jpg
marijuana.jpg
marijuana.jpg

Occupational Exposures within Cannabis Manufacturing

Dec. 17, 2018
NIOSH entered a medical marijuana manufacturing facility to study the safety concerns associated with the industry.

The astounding rate at which the cannabis industry is growing is leaving a large compliance gap on the occupational health and safety front, according to the National Institute for Occupational Safety and Health (NIOSH).

The agency, a subset of the Centers for Disease Control and Prevention, recently visited a medical marijuana production facility that had both indoor and outdoor growing operations after a union representative raised a red flag.

A Health Hazard Evaluation Program was created after potential occupational safety hazards both in harvesting and processing were not being addressed, according to the representative.

"We evaluated a medical cannabis facility and detected cannabis components on surface wipes throughout the facility," NIOSH stated in its report. "Diacetyl and 2,3-pentanedione were identified in screening air samples, but later were not quantifiable in personal air samples. Observed fungal and endotoxin exposures can increase allergic and respiratory symptoms, which employees reported.

Facility visits were completed on August 2016 and April 2017. Investigators observed work procedures in cultivation, harvesting, processing and decarboxylation. 

Both air and surface samples were taken to measure the levels of organic compounds, and NIOSH studied fungal diversity analysis and endotoxins, which are products some bacteria release. Particle concentrations in the air also were taken during the grinding process.

Employees were interviewed about job tasks, health and safety concerns, personal protective equipment use, injuries at work, job stress, physical working conditions and psychosocial factors at work, according to the agency. 

In addition, NIOSH collected data on worker health history and respiratory symptoms and tested lung function. Results should that seven of the eight workers tested had normal results.

Workers reported the following issues to NIOSH:

  • moderate job stress due to heavy workload;
  • safety concerns related to working with high pressure carbon
  • dioxide, exit doors needing a badge to unlock for egress, ergonomics, and working with
    large amounts of solvents;
  • concerns about having to perform tasks that are not part of their
    job description; and
  • allergic, irritant, and musculoskeletal symptoms.

Despite possible exposures to diacetyl or 2,3-pentanedione, the medical marijuana facility had no written respiratory plan.

NIOSH provided the following recommendations for the employer:

  • Install local exhaust ventilation to reduce exposures during grinding operations.
  • Move the decarboxylation process to a seldom occupied area in the facility to prevent
    unnecessary exposures to diacetyl and 2,3-pentanedione.
  • Limit access to the areas where higher exposure tasks are occurring.
  • Redesign security doors to allow emergency egress without needing a badge to exit
    the facility.
  • Encourage employees to report new or ongoing symptoms to their personal healthcare
    provider and a designated health and safety representative within the workplace.
  • Develop and implement a written respiratory protection program that meets the requirements of the OSHA's respiratory protection standard.
  • Talk to employees about whether workload could be better managed and how. Clearly
    define job roles and talk to employees how to minimize role overload. If feasible, hire
    more employees to reduce the workload of individuals.

In addition, the agency stressed to workers the importance of wearing personal protective equipment as required by the company. Employees also should report any new or ongoing symptoms to a personal physician and to the designated representative within the workplace.

Sponsored Recommendations

3 Essential Elements for a Strong Safety Culture

March 13, 2024
Organizations globally have increased their attention on safety culture: trying to figure out what it really is and the aspects that are necessary to develop and sustain it. And...

Making the Case for Occupational Health Software

March 13, 2024
Deciding to invest in Occupational Health (OH) software can be a challenging leap for many organizations. This article will equip businesses with insightful strategies for effectively...

Fighting the Flu: Solutions for the Workplace

March 13, 2024
Seasonal flu continues to wreak considerable havoc both on individual wellness, as well as on our business continuity and productivity. Explore these solutions for protecting ...

Preventing SIFs with Digitization: Reduce Serious Injuries and Fatalities with Technology

March 13, 2024
This eBook discusses the origins of SIF prevention, outlines principles, models and tools available to EHS leaders to better detect and address SIF potential in their business...

Voice your opinion!

To join the conversation, and become an exclusive member of EHS Today, create an account today!