Little Giant Ladder
Even though it weighs the same as an ordinary stepladder, the King Kombo works as a wide-based stepladder, a wide-based straight extension ladder, and a leaning ladder, but it does far more than just three configurations. The King Kombo will be available in three models in multiple sizes, each tailored for specific customers: professional, industrial and technical. You can set King Kombo from storage to stepladder to extension in seconds. For tasks like painting, running wire, or accessing a hard-to-reach corner, you can simply use King Kombo as a safe leaning ladder. Thanks to its rotating wall pad accessory for the leaning position, the King Kombo conforms to and protects inside and outside corners and damageable surfaces like aluminum siding, drywall and stucco.
Little Giant Ladders
UltraDuty GHS Labels by Avery are industrial-grade labels designed to be chemical resistant, tear resistant, abrasion resistant and constructed with a marine-grade adhesive that is waterproof and passes a 90-day seawater submersion adhesion test. Using Avery’s design and print online software allows employees to create, customize and print their own hazardous waste labels at their desk from pre-designed, EPA-compliant, templates. The pre-printed labels allow easy selection of the applicable GHS pictograms or hazardous properties along with accumulation start data and content composition. These help to simplify proper labeling and are compatible with ball point pens and permanent markers. The labels are waterproof and resistant to chemicals, abrasion, tearing, UV, and their permanent adhesive passes a 90-day saltwater immersion test. Such labels can work for a variety of hazardous waste generators including VSQG, SQG, LQG, as well as sub-part K (academic laboratories).
Three new tool tethering kits from Ergodyne promise workers everything they need to tether screwdrivers, hex keys, pliers, combination wrenches, mobile devices and power grinders with confidence – all in one handy kit. The 3194 Hand Tool Tethering Kit and the 3195 Cell Phone Tool Tethering Kit feature the new 3156 coil yool lanyard in addition to other ANSI/ISEA 121-2018 compliant components. The Squids Grinder Tool Tethering Kit includes a 3110F(x) dual-carabiner tool lanyard and a 3797 power tool bracket to tether one standard corded or cordless grinder power tool weighing up to 8 lbs. (3.6kg).
OSHA’s final ruling on crystalline silica means more concrete and construction workers will need to wear respirators along with their safety glasses. Unfortunately, wearing respirators and safety eyewear together often leads to fogged eyewear. IQuity from Radians is a super-hydrophilic, water-based coating. IQuity anti-fog coating is currently available in four popular ANSI Z87.1 impact-resistant safety eyewear. Each safety glass is sealed in an air-tight bag for longer shelf-life and packaged in a designer box. They include Rad-Sequel IQ, Dagger IQ , Optima IQ, and the recently-introduced Obliterator IQ with foam lining and adjustable head strap. Compared to toxic, solvent based coatings, IQuity is environmentally friendly, non-toxic, and is both EN166 K and N compliant.
The R15 emergency oxygen device was designed in conjunction with the University of Michigan to provide immediately accessible 100%, non-explosive oxygen even in public areas where oxygen cylinders are restricted by law. It provides 15 minutes of humidified oxygen at 6 lpm for cardiac and airway emergencies while waiting for EMS arrival. It is easy to use, no training or maintenance required. The technology does not require a prescription. In addition, it does not run on electric or battery power. Unlike oxygen cylinders, R15 is non-explosive and does not require specialized storage. To use, the worker should lay the unit flat and pull tape to open the mask compartment. Then he/she must rotate lever to line (Lever cannot be reversed) and secure mask over mouth and nose with strap.