Managing Safety: Safety Measurement: The Dysfunctional Big Picture

Oct. 10, 2011
Far too often, organizations known for excellent safety performance are surprised by significant events occurring at their sites that result in major property damage, or worse, death. If you are surprised by results, positive or negative, you are not paying attention to the indicators.

Are individuals in your company excited or fearful of safety measurement? Is measurement used to hold people accountable for what they did well, or what they did wrong? When new measurement opportunities are identified, are people eager to participate, or do you anticipate managing resistance to change?

The scenario: Two years from now, you receive an award celebrating the achievement of perfection in the standard measurements of safety performance. The metrics that indicate this are your incident frequency, severity, and costs. You have achieved a year with zero recordables, zero claims and most importantly, not a single minor injury. Zero people were hurt in your organization. Congratulations!

As the recipient of this significant achievement, you ready yourself to receive this award. With the plaque handed to you, the presenter asks the following questions, “What specifically did you do this year to accomplish this result? Do you feel highly confident that you’ll achieve the same results again next year?”

Managing Results or Performance?

The ability to answer this question correctly and confidently is the mark of true safety excellence and effective leadership. If you are unable to determine what observable performance is occurring to achieve this desirable result, how will it be achieved year after year? Luck? Luck may be important when choosing lottery numbers, but it is not an effective strategy for high-performing individuals.

Measuring the sustainability of safety excellence is no different than any other area of operational performance. Excellence is sustained when defined by the observable necessary performance, the expected results that follow and the interface between the two. Regretfully, most organizations only measure and manage the results, leading many to solely focus on the goal and ignore the path towards it.

Goals Defined in the Positive or Negative?

Decades ago, there was a great movement to end world hunger. With such an ambiguous goal, little support and funding followed. Mother Theresa once said, “If I look at the mass, I will never act. If I look at the one, I will.”

In the 1980s, a television host walked a little girl in front of the screen and asked the viewing audience to feed the starving child. Charities, known for their ability to solicit discretional effort, leveraged the ability to show the goal in the positive, making it personal and inspiring discretional effort. Imagine if this strategy was applied to our goals in organizational safety performance?

Rather than defining safety excellence as a lack of injuries, define it by the actions taken by employees to contribute to safety performance. Then, hold them positively accountable for their individual effort and celebrate when success is achieved. Consider the impact on the culture when the goal is defined by fewer injuries, which are, in fact, failures of the organizational systems to protect the injured parties.

“Let’s work really hard this year to fail less,” becomes the informally spoken rallying cry. Rather than a culture aligned to achieve something, you have a culture working hard to have fewer failures. Would a coach motivate players by saying, “Don’t lose any games and we can become the best-ranked team!” I think not.

Organizations never will achieve sustainable excellence in safety when the focus is on what not to do, and the measurements are negatively defined. Measure what you want and celebrate when goals are achieved. When you reward results, you reinforce the performance, both good and bad, that achieved it. Without a clear understanding of which specific performance led to specific results, it is likely that the only correlation is luck.

What to Measure?

Hard data always will be necessary. Most leaders have learned to trust data and hold a very low opinion of anecdotal information. It is no wonder some employees feel their employer only is eager to spend money to address safety concerns following the injury, rather than prior to it. Occasionally, we need to listen to the opinions of staff and employees.

Consider finding yourself in the middle of the ocean and you receive a message that you are halfway to your destination, yet you can see no visible navigation points. This is similar to our often-used lagging indicators. Your frequency rate does little to prescribe the path to continuous improvement once you reach a certain point. It is important to determine how you will ensure you are working your plan, and if your plan is working.

A transformational measurement for one organization can be a pointless metric for another, yet transformation is what is needed. Be wary of offerings that provide a standard list of leading indicator measurements of behavior, culture, perceptions and activities. What works for one organization will not necessarily work for another company. Moreover, if we desire for workers to have ownership and hold themselves personally accountable for contributing towards the results, those being measured need to at least provide input into the measurements. They also should be privy to explanations of the reasoning and rationale behind them.

Be sure to answer ever-present “What’s in it for me?” (WIIFM) question, especially when attempting to measure discretional effort. Each organization needs to determine what measurements are most important for them. This should result from a collaborative exercise with participants from each level in the organization, board of directors included, for optimal effectiveness.

What is the goal of measurement, metrics, programs, observations, audits, etc.? It’s not to gather data, but to help focus and align individuals in a direction to achieve safety excellence at work and away. The true purpose of any form of effective measurement is to motivate people, create and reinforce clear expectations, direct both mandatory and discretional effort and, most importantly, inspire people towards a goal!

Do not get inundated in attempting to identify all the things you could measure and the pathways to obtain the metrics. You will have failed before the measurement begins. As in any measurement, it is not just the quantity, but also the quality. The metrics are important but are not the goal. The goal is ensuring we are doing the right things to create the right culture and providing the right leadership at all levels to result in sustainable safety excellence.

Shawn M. Galloway is the president and COO of ProAct Safety, an international safety excellence firm. As an executive coach, professional speaker, advisor and strategist, he has assisted hundreds of international organizations to achieve and sustain excellence in safety, culture and operational performance. He also is the host of the weekly podcast series, Safety Culture Excellence. He can be reached at 800-395-1347 or [email protected].

About the Author

Shawn M. Galloway | CEO

Shawn M. Galloway is CEO of ProAct Safety and an author of several books, including Bridge to Excellence: Building Capacity for Sustainable Performance. As an award-winning consultant, adviser, leadership coach, and keynote speaker (including at EHS Today's Safety Leadership Conference), he has helped hundreds of organizations within every primary industry to improve safety strategy, culture, leadership, and engagement. He also hosts the weekly podcast series Safety Culture Excellence. For more information, call (936) 273-8700 or email [email protected].

Sponsored Recommendations

10 Facts About the State of Workplace Safety in the U.S.

July 12, 2024
Workplace safety in the U.S. has improved over the past 50 years, but progress has recently stalled. This report from the AFL-CIO highlights key challenges.

Free Webinar: ISO 45001 – A Commitment to Occupational Health, Safety & Personal Wellness

May 30, 2024
Secure a safer and more productive workplace using proven Management Systems ISO 45001 and ISO 45003.

ISO 45003 – Psychological Health and Safety at Work

May 30, 2024
ISO 45003 offers a comprehensive framework to expand your existing occupational health and safety program, helping you mitigate psychosocial risks and promote overall employee...

Case Study: Improve TRIR from 4+ to 1 with EHS Solution and Safety Training

May 29, 2024
Safety training and EHS solutions improve TRIR for Complete Mechanical Services, leading to increased business. Moving incidents, training, and other EHS procedures into the digital...

Voice your opinion!

To join the conversation, and become an exclusive member of EHS Today, create an account today!