OSHA
osha_enforcement

Ten Most-Asked Questions about the OSHA Inspection Process

June 7, 2018
What happens when an OSHA inspector shows up at your door? Two former OSHA inspectors tell all.

How exactly does OSHA work? Is the government really out to get every company and to cite every workplace safety violation? What happens when an OSHA inspector shows up at your door? And can you actually beat an OSHA citation?

Who better to know—and reveal—the secrets of what prompts and occurs during an OSHA inspection than former OSHA officers? At the ASSP 2018 show in San Antonio, Texas, two retired OSHA officers who now work for consulting firm Safety Controls Technology—Nick Walters, formerly regional administrator for Region V (Chicago) and Tom Bielema, formerly Area Director for the Peoria, Ill, OSHA office—shared their field experiences. Walters and Bielema have a combined 47 years of OSHA experience.

1. Why did OSHA pick my company for an inspection?

OSHA follows a number of priorities when determining which facilities to inspect. Those priorities include:

·        imminent danger

·        fatalities and catastrophes

·        sever injuries (i.e., hospitalization, amputation or loss of an eye)

·        employee complaints

·        referrals, whether from law enforcement, other government agencies or the media

·        programmed inspections, such as National Emphasis Programs (NEP) or Local Emphasis Programs (LEP)

2. Can I ask for a copy of the OSHA complaint?

Yes, absolutely.

3. Can I ask OSHA to get a warrant?

Again, yes, but you should seriously consider whether you really want to raise the idea in OSHA’s mind that you might have something to hide. All OSHA personnel will present their credentials if you have any reason to question the legitimacy of the inspection or the personnel.

4. What documents am I required to provide to the Compliance Officer?

Typical documents requested include the organization’s Federal Employer ID number, OSHA injury and illness logs, written programs, and training records.

5. Can I limit the scope of the inspection?

Yes, particularly to manage and limit the risk of providing OSHA more information than you necessarily ought to. For instance, resist the temptation to offer OSHA a full tour of your facility or campus. You should definitely require the Compliance Officer to follow all workplace safety procedures. Also, let them know about any trade secret areas in your facility. You should know the scope of the inspection and limit areas of access and travel routes (where appropriate) to only the areas within that scope.

6. How does OSHA decide whether or not I get a citation and what the penalty amount will be?

Penalties are calculated based on severity as well as probability, with mitigating factors including history and good faith. There are four violation types:

·        Willful: a violation that the employer intentionally and knowingly commits or a violation that the employer commits with plain indifference to the law. OSHA may propose penalties of up to $129,336 for each willful violation.

·        Serious: a violation where there is substantial probability that death or serious physical harm could result and that the employer knew, or should have known, of the hazard. There is a mandatory penalty for serious violations which may be up to $12,934.

·        Other-than-serious: a violation that has a direct relationship to safety and health, but probably would not cause death or serious physical harm. OSHA may propose a penalty of up to $12,934 for each other-than-serious violation.

·        Repeated: a violation that is the same or similar to a previous violation. OSHA may propose penalties of up to $129,336 for each repeated violation.

7. Does OSHA have a quota system?

In a word, no.

8. What are my options after I receive a citation?

Companies have three options:

·        Accept the citations, correct the conditions and pay the penalty.

·        Participate in an informal conference.

·        Contest the citations, which must be done in writing within 15 working days of the final order.

9. Should I schedule an informal conference and what should I expect when I go to the OSHA office?

They suggest you should always take the informal conference option, where you should be able to get a better explanation of the violation, the standards cited, what is needed to correct the violation, and other issues.

10. Can we beat an OSHA citation?

Yes, particularly if the violation is due to employee misconduct. You must be able to prove all four of these:

·        A work rule was violated.

·        The work rule had been properly communicated.

·        Your organization needs to prove it actively monitors compliance to the rules.

·        Disciplinary actions were taken.

About the Author

Dave Blanchard | Editor-in-Chief / Senior Director of Content

During his career Dave Blanchard has led the editorial management of many of Endeavor Business Media's best-known brands, including IndustryWeek, EHS Today, Material Handling & Logistics, Logistics Today, Supply Chain Technology News, and Business Finance. In addition, he serves as senior content director of the annual Safety Leadership Conference. With over 30 years of B2B media experience, Dave literally wrote the book on supply chain management, Supply Chain Management Best Practices (John Wiley & Sons, 2021), which has been translated into several languages and is currently in its third edition. Prior to joining Endeavor/Informa/Penton, he spent a decade covering the artificial intelligence industry. He is a frequent speaker and moderator at major trade shows and conferences, and has won numerous awards for writing and editing. He is a voting member of the jury of the Logistics Hall of Fame, and is a graduate of Northern Illinois University. 

Sponsored Recommendations

10 Facts About the State of Workplace Safety in the U.S.

July 12, 2024
Workplace safety in the U.S. has improved over the past 50 years, but progress has recently stalled. This report from the AFL-CIO highlights key challenges.

Free Webinar: ISO 45001 – A Commitment to Occupational Health, Safety & Personal Wellness

May 30, 2024
Secure a safer and more productive workplace using proven Management Systems ISO 45001 and ISO 45003.

ISO 45003 – Psychological Health and Safety at Work

May 30, 2024
ISO 45003 offers a comprehensive framework to expand your existing occupational health and safety program, helping you mitigate psychosocial risks and promote overall employee...

Case Study: Improve TRIR from 4+ to 1 with EHS Solution and Safety Training

May 29, 2024
Safety training and EHS solutions improve TRIR for Complete Mechanical Services, leading to increased business. Moving incidents, training, and other EHS procedures into the digital...

Voice your opinion!

To join the conversation, and become an exclusive member of EHS Today, create an account today!