Getty Images
How  to Keep Your Manufacturing Employees Virus-Free at Work

How to Keep Your Manufacturing Employees Virus-Free at Work

March 26, 2020
Best practices on keeping workers healthy at manufacturing plants still in production.

For manufacturers that are considered essential and are remaining open, MAGNET: The Manufacturing Advocacy and Growth Network, Northeast Ohio's Manufacturing Extension Partnership (Ohio MEP) partner, has some suggestions on how to keep employees virus-free while working.

In addition to government guidelines which include,

 Interim Guidance for Businesses and Employers to Plan and Respond to Coronavirus Disease 2019 (COVID-19)

Guidance on Preparing Workplaces for COVID-19

the group has sources these suggestions based on what companies both locally and globally are doing.

The guidance is as follows:

•All office teams work remotely (sales team, marketing teams and finance teams as well as back-office). When this isn’t possible, spread out remaining staff as far as possible and hold not in-person meetings – use remote tools even room-to-room.

•  People should keep 6 feet distance when they talk and even some things are being rearranged in the plant to accommodate others working 6 feet from one another if possible.  As this may become the new normal, any steps you take now to spread areas out will likely be good for the future too.

•Temperature checks before entering the factory gate (use IR scanning thermometer that does not require touching skin or ear temperature with an alcohol swab in between). Note: there are legal implications for this (see here). A person who shows temperature above 99.5 degrees is not allowed to enter.

•  Wearing masks or other PPE while in the factory (there is a shortage now, so this is not likely useful).

•  All doors are left open or even removed when appropriate to eliminate surfaces.

•  Increase ventilation rates and increase the percentage of outdoor air that circulates into the system

•  Buy all no-touch disposal receptacles or remove lids that require contact to open.

• Disinfect all touched surfaces between each shift.

•  Eliminate all routine shift hand-off meetings or limit them to just particular people or do them virtually.

•  If you can move from 1 or 2 shifts to 3 shifts and keep each shift with the same people each day, then if one shift is sick the others are protected. This arrangement can also work by having one crew for part of the week and one crew for the other part of the week.  This may also accommodate shifting child care schedules.

•  Stagger shift start/stop times, break times, and lunchtimes to minimize congregations at the time clocks or break areas.

•  Zone the factory and prohibit employees from wandering into zones where they do not need to be to perform their jobs.

•  Isolate key personnel without whom the factory cannot operate (e.g., boiler operators, wastewater treatment engineers, lead electricians, maintenance, etc.) to prevent them from getting ill.

•  Shutdown the plant when production is not needed (even if you ramp on and off on a daily basis). Every bit of time not spent around other people may eliminate the spread of the virus.

While these are specific guidelines from Ohio's Executive Order, they can apply to all states. They also include:

•  Allow as many employees as possible to work from home by implementing policies in areas such as teleworking and video conferencing

•  Actively encourage sick employees to stay home until they are free of fever

•  Separate employees who appear to have acute respiratory illness symptoms from other employees and send them home immediately. Restrict their access to the business until they have recovered.

•  Reinforce key messages – stay home when sick, use cough and sneeze etiquette and practice hand hygiene – to all employees, and place posters in areas where they are most likely to be seen. Provide protection supplies such as soap and water, hand sanitizer, tissues and no-touch disposal receptacles for use by employees.

•  Frequently perform enhanced environmental cleaning of commonly touched surfaces, such as workstations, countertops, railings, door handles and doorknobs. Use the cleaning agents that are usually used in these areas and follow the directions on the label. Provide disposable wipes so that commonly used surfaces can be wiped down by employees before each use.

About the Author

Adrienne Selko | Senior Editor

Email [email protected]

LinkedIn

Adrienne Selko is also the senior editor at Material Handling and Logistics and is a former editor of IndustryWeek. 

 

 

 

Sponsored Recommendations

Avetta Named a Leader in The Verdantix Green Quadrant: Supply Chain Sustainability Software 2024

Nov. 26, 2024
Avetta was named a leader by Verdantix in a 2024 sustainability software report for our ability to help clients and suppliers build sustainable supply chains.

Avetta is a Leader in Supply Chain Sustainability Software

Nov. 26, 2024
Verdantix has named Avetta a leader in its 2024 Green Quadrant for Supply Chain Sustainability Software. Download the report for independent insights into market trends and top...

The Power of Benchmarking in Procurement: Driving Success and Strategic Planning

Nov. 26, 2024
Explore the strategic impact of benchmarking in procurement to drive success and plan effectively.

The Five Eras of Safety Maturity

Nov. 26, 2024
Discover the 5 Eras of Safety Maturity, from reactive measures to data-driven assurance, and how organizations can evolve toward proactive safety cultures.

Voice your opinion!

To join the conversation, and become an exclusive member of EHS Today, create an account today!