silicadust.gif
silicadust.gif
silicadust.gif
silicadust.gif
silicadust.gif

Construction Employers: Do You Have a Silica-Competent Person?

April 3, 2013
The American Industrial Hygiene Association has released a white paper that provides the recommended skills and capabilities for “silica-competent persons.”

A key component in preventing overexposure to silica and subsequent disease is to have at least one individual on the job site who is capable of recognizing and evaluating situations where overexposure may be occurring; who knows how to evaluate the exposure potential; and who can make an initial recommendation on how to control that exposure. This is the role of the “silica-competent person.”

The American Industrial Hygiene Association (AIHA) has released the white paper, “Recommended Skills and Capabilities for Silica Competent Persons,” http://www.aiha.org/newspubs/govtaffairs/Pages/PositionStatements.aspx which represents a common, minimum body of knowledge needed by a competent person to provide meaningful worker protection from silica. The document was prepared by the AIHA Construction Committee Silica Competent Person Project Team.

The hazards of excessive exposure to crystalline silica have been known since ancient times, going back to the construction of the pyramids. However, despite more than 2,000 years of knowledge that silica is a hazard, data from the National Occupational Respiratory Mortality System indicates that between 1990 and 1999 there were still 118 reported silica-related deaths in the construction industry.

The construction industry is dominated by small- and medium-sized employers. Over 80 percent of construction establishments have 10 or fewer employees, according to The Construction Chart Book, published by the Center for Construction Research and Training. Many small- and medium-sized employers do not have safety or industrial hygiene staff.

An approach used by OSHA and ANSI for construction regulations and guidance is to specify that an employer designate a “competent person” for hazards involving medium to high complexity. OSHA’s Advisory Committee for Construction Safety and Health (ACCSH) has recommended that OSHA utilize a competent person approach for the upcoming proposed silica in construction rule. In addition, the National Occupational Research Agenda (NORA) construction goals for silica identified competent person training needs as an area for partnering and development.

According to the white paper, silica-qualified person:

  • Has a recognized degree, certificate, or professional standing in an occupational health, safety, environmental, or engineering field (e.g., CIH, CSP, PE);
  • Has extensive knowledge, training, and experience in hazards and control of silica hazards on the construction site through formal training and/or extensive, firsthand experience in anticipation, recognition, evaluation, and control of worker silica exposure; and
  • Can make quantitative assessments of worker exposure and recommend detailed control measures.

The person also should be able to identify silica, understand the hazards and routes of exposure, be able to determine if silica is present and is knowledgeable about published exposure level ranges for common construction jobs and understand the controls used to minimize the risk of worker exposure to silica.

Sponsored Recommendations

3 Essential Elements for a Strong Safety Culture

March 13, 2024
Organizations globally have increased their attention on safety culture: trying to figure out what it really is and the aspects that are necessary to develop and sustain it. And...

Making the Case for Occupational Health Software

March 13, 2024
Deciding to invest in Occupational Health (OH) software can be a challenging leap for many organizations. This article will equip businesses with insightful strategies for effectively...

Fighting the Flu: Solutions for the Workplace

March 13, 2024
Seasonal flu continues to wreak considerable havoc both on individual wellness, as well as on our business continuity and productivity. Explore these solutions for protecting ...

Preventing SIFs with Digitization: Reduce Serious Injuries and Fatalities with Technology

March 13, 2024
This eBook discusses the origins of SIF prevention, outlines principles, models and tools available to EHS leaders to better detect and address SIF potential in their business...

Voice your opinion!

To join the conversation, and become an exclusive member of EHS Today, create an account today!