While silica exposure most often is linked to construction work researchers have found that some workers at hydraulic fracturing operations are exposed to as much as 10 times the recommended exposure limit for crystalline silica

Respirators Are Not Enough: New Study Examines Worker Exposure to Silica in Hydraulic Fracturing Operations

Aug. 1, 2013
Some workers are exposed to 10 times the recommended exposure limit for crystalline silica during hydraulic fracturing operations.

A new study, “Occupational Exposures to Respirable Crystalline Silica During Hydraulic Fracturing,” found respirable crystalline silica, a human lung carcinogen, to be an occupational exposure hazard for workers at hydraulic fracturing (fracking) operations. Researchers also found that the most commonly used type of respirator – the half-mask air-purifying respirator – might not provide enough protection for workers.

The study, published in the Journal of Occupational and Environmental Hygiene (JOEH), is the first systematic investigation of worker exposure to crystalline silica during directional drilling and fracking operations, a process used to stimulate well production in the oil and gas industry.

Field researchers from the NIOSH Western States Office (WSO) and the Division of Applied Research and Technology (DART) collected 111 personal breathing zone samples at 11 sites in five states over a 15-month period to evaluate exposures to respirable crystalline silica during fracking operations.

“Certain work in this industry requires employees to be in areas where respirable silica levels may exceed defined occupational exposure limits like the OSHA Permissible Exposure Limit or the NIOSH Recommended Exposure Limits [RELs],” said researcher Michael Breitenstein, who is with the NIOSH DART in Cincinnati. “However, our study found that in some cases, full shift personal breathing zone exposures exceeded 10 times the REL.”

Respirable silica is the portion of crystalline silica that is small enough to enter the gas-exchange regions of the lungs if inhaled and includes particles with aerodynamic diameters less than approximately 10 micrometers (μm). Occupational exposures to respirable crystalline silica are associated with the development of silicosis, lung cancer, pulmonary tuberculosis and other respiratory diseases. These exposures also may be related to the development of autoimmune disorders, chronic renal disease and other adverse health effects.

“Although half-mask, air-purifying respirators are most commonly used at hydraulic fracturing sites, due to the magnitude of the silica concentrations measured, half-masks might not be sufficiently protective,” said researcher Eric J. Esswein, of the NIOSH WSO in Denver. “In some cases, silica concentrations exceeded the maximum use concentration for that type of respirator.”

According to NIOSH, the risks of silica exposures for workers exposed at or above the REL (0.05 mg/m3) may be minimized by substituting less hazardous materials and using engineering controls to limit exposures. In cases when engineering controls are not sufficient to keep exposures below the REL, NIOSH recommends using appropriate respiratory protection, and making medical examinations available to exposed workers.

About the Author

Sandy Smith

Sandy Smith is the former content director of EHS Today, and is currently the EHSQ content & community lead at Intelex Technologies Inc. She has written about occupational safety and health and environmental issues since 1990.

Sponsored Recommendations

10 Facts About the State of Workplace Safety in the U.S.

July 12, 2024
Workplace safety in the U.S. has improved over the past 50 years, but progress has recently stalled. This report from the AFL-CIO highlights key challenges.

Free Webinar: ISO 45001 – A Commitment to Occupational Health, Safety & Personal Wellness

May 30, 2024
Secure a safer and more productive workplace using proven Management Systems ISO 45001 and ISO 45003.

ISO 45003 – Psychological Health and Safety at Work

May 30, 2024
ISO 45003 offers a comprehensive framework to expand your existing occupational health and safety program, helping you mitigate psychosocial risks and promote overall employee...

Case Study: Improve TRIR from 4+ to 1 with EHS Solution and Safety Training

May 29, 2024
Safety training and EHS solutions improve TRIR for Complete Mechanical Services, leading to increased business. Moving incidents, training, and other EHS procedures into the digital...

Voice your opinion!

To join the conversation, and become an exclusive member of EHS Today, create an account today!