OSHA Fines Ga. Company Nearly $155,000

Aug. 8, 2000
OSHA cited Specialty Fixtures Inc., and proposed penalties\r\ntotaling $154,800 for safety and health violations at the company's\r\nGwinnett County facility.

OSHA cited Specialty Fixtures Inc., and proposed penalties totaling $154,800 for safety and health violations at the company''s Gwinnett County facility.

The inspection began in response to a safety complaint and was expanded to include health items after OSHA''s Atlanta-East office observed several health hazards.

Following the inspections at the plant, the agency cited the company and proposed penalties totaling $126,000 for three willful health violations:

  • exposing employees to excessive levels of hazardous chemical methylene chloride without effective engineering controls and without required respiratory protection;
  • failure to establish a monitoring program to periodically audit employee exposure to methylene chloride, and
  • failure to adequately inform and train employees about the use of hazardous materials.

Additional penalties totaling $14,100 were proposed for five serious health violations involving failure to provide: a regulated area and a medical surveillance program for employees exposed to methylene chloride; a workplace hazard assessment program, and personal protective equipment and eye protection for employees involved in spraying glue, cutting wood and using nail guns.

OSHA''s safety inspection of the plant resulted in penalties of $14,700 for eight serious violations including:

  • spraying flammable materials in an area with open flames;
  • using PVC pipe to transport compressed air without encasing the pipe in a proper conduit;
  • blocking emergency fire exits;
  • improperly dispensing flammable liquids, and
  • operating nail guns and radial-arm saws without safety devices.

"Company officials had been advised of hazards associated with the use of methylene chloride during a 1997 safety and health inspection," said Ray Finney, OSHA''s Atlanta-East area director. "At that time, the company signed an agreement to abate the conditions for which they were cited."

Finney continued, "OSHA has particular concerns when an employer signs an agreement to abate hazards and then fails to honor it. This company knew what the hazards were and did little to correct them."

Specialty Fixtures employs about 90 workers at the Gwinnett facility to manufacture cabinets for business offices and industrial displays.

by Virginia Sutcliffe

Sponsored Recommendations

ISO 45001: Occupational Health and Safety Management Systems (OHSMS)

March 28, 2024
ISO 45001 certification – reduce your organizational risk and promote occupational health and safety (OHS) by working with SGS to achieve certification or migrate to the new standard...

Want to Verify your GHG Emissions Inventory?

March 28, 2024
With the increased focus on climate change, measuring your organization’s carbon footprint is an important first action step. Our Green House Gas (GHG) verification services provide...

Download Free ESG White Paper

March 28, 2024
The Rise and Challenges of ESG – Your Journey to Enhanced Sustainability, Brand and Investor Potential

Free Webinar: Mining & ESG: The Sustainability Mandate

March 28, 2024
Participants in this webinar will understand the business drivers and challenges of ESG and sustainability performance, the 5 steps of the ESG and sustainability cycle, and prioritized...

Voice your opinion!

To join the conversation, and become an exclusive member of EHS Today, create an account today!