5 AI Trends Defining the Future of Process Safety

The value of AI in process safety is not just saved admin time, but faster follow-up, more field presence and stronger worker trust.

Key Highlights

  • Agents can link reports, inspections and change requests to reveal patterns that might otherwise go unnoticed.
  • Start with a clearly defined task, accountable owner and limited pilot; expand only after the team has evaluated performance.
  • Human reviewers need manageable workloads and evidence behind agent flags to guard against automation bias.
  • Treat AI deployment as a change: connect relevant data, assess hazards and consult affected workers before and after launch.
  • Measure whether reports lead to action, corrective actions close faster and safety teams spend more time in the field.

An operator on the second shift notices a relief valve weeping on a transfer line and a pressure reading that’s running higher than usual. She calls it into the control room and logs it before she heads home, and someone writes a work order. What nobody puts together is that the same valve is past due for inspection and the line it sits on has an open change request. Weeks go by without her hearing what happened, so the next time she sees something like that, she mentions it on the radio and leaves it there.

Most process safety professionals have seen some version of this, where all the information was there but spread across three systems, and the team was too stretched to connect it or close the loop. Because nobody got back to her, she stopped putting things in writing, and that’s a real loss, since operators like her are usually the first to see a problem coming.

I’ve spent a lot of time with safety and operations leaders in high-hazard industries, and her story comes up in one form or another almost every time. Their teams spend much of the day chasing corrective actions, re-entering data and getting ready for audits, which leaves less time on the unit with people like her.

That’s the gap AI agents could fill. For teams wary of AI, it’s an encouraging place to start, because the work agents are best suited to is the work safety professionals would most like to hand off. An agent is software that carries out a multistep task on its own instead of answering a single question, and I see five shifts shaping how process safety teams will use them. I’ll walk through each one using the operator’s report.

1. Process Safety Is Moving from Compliance to Risk Intelligence

For a long time, process safety management has been organized around proving compliance, but leaders are starting to think differently about the records all that work produces. Near-miss reports, inspection findings, management of change (MOC) requests and corrective actions hold early signs of where risk is building, if someone has time to read them together, and most teams never have.

The operator’s report is a good example. On its own, a weeping relief valve looks like a maintenance item, but next to an overdue inspection and an open change request on the same line, it starts to look like a pattern worth a closer look. An agent with access to all three systems could make that connection in seconds, where a person would have to dig through each one to find it.

Getting value from agents won’t start with the technology. It will start with asking supervisors, operators and maintenance crews what slows the safety process down. That instinct lines up with something process safety has always valued, since OSHA’s process safety management standard requires employee participation and OSHA’s Recommended Practices for Safety and Health Programs list worker participation as one of seven core elements.

The next step is deciding what “better” would look like before anyone sits through a vendor demo. If the goal is faster follow-up on near-miss reports, put a number on “faster” first.

2. AI Agents Are on Track to Become Process Safety Co-Pilots

The first generation of AI tools answered questions. The next generation is being built to take action. Before long, an agent could route a report, follow up with the person who owns it and update the record without anyone starting each step.

Picture what that could have meant for the operator’s report. The night she filed it, an agent could have flagged the overdue inspection and the open MOC, sent all three to the area supervisor and, a week later, let her know what was done. None of that requires the agent to make a safety decision, because its job is to keep information moving to the people who make them. For anyone uneasy about AI in process safety, that’s the part worth holding onto. The agent would handle the follow-up that tends to fall through the cracks, and people would keep the decisions.

That’s why I think of agents as co-pilots that still answer to a captain. How one is brought on will shape how much a team can trust it, the same way a new safety coordinator gets a job description, a supervisor and smaller assignments before anyone hands over full authority.

Teams that bring agents on well will treat them the same way. Someone writes down what the agent is responsible for and where its job ends, and one person owns it. It starts on a single unit or a single type of report and grows only after the team has watched it work, and everyone knows how to flag a problem with it or pause it.

3. Human Oversight Is Becoming More Important, Not Less

As agents take on more, the human role shifts from doing the work to checking it, and a sign-off only protects you if the person giving it is paying attention.

Think about the area supervisor who gets the agent’s flag about the valve the operator reported. If it’s one of five that week, the supervisor will read it closely, but if it’s one of 200 and the last 199 were right, probably not. It’s called automation bias, and the longer a system goes without a mistake, the harder it gets to catch the one it eventually makes.

None of this is new to process safety, since it’s the same dynamic behind alarm floods, and the fixes look familiar too. Review loads have to be realistic, and agents should show the information behind each flag so the reviewer has something concrete to weigh. Some teams also pull a sample of approved items for a second look and make sure reviewers keep doing the underlying work often enough to spot an error when one slips through.

4. Connected Safety Data Is Becoming the Foundation for AI

An agent can only connect what it can see, and at a lot of sites, incident reports live in one system, inspections in another, MOC records in a third, and training in a spreadsheet. If that’s true where the operator works, no agent would have linked her report to the overdue inspection, because it wouldn’t have known the inspection existed. That’s a big reason organizations are working to connect their safety data, whether through a single platform or well-integrated systems.

Connecting all of that raises the stakes, though, because safety professionals ask what could go wrong whenever the work changes, and AI changes the work. In a January 2026 NIOSH bulletin, “Practical Strategies to Manage AI Hazards in the Workplace,” the authors point out that algorithms can’t directly create physical, chemical or biological hazards, but they can change the risk profile of the equipment and processes they control and create psychosocial hazards on their own by changing how work is organized and what skills it takes. An agent that reshuffles assignments and piles extra work on one crew without anyone noticing would be one example.

Process safety teams are better equipped for this than most, because an AI deployment is a change and they already have a discipline for managing change. Teams that handle it well will run AI through management of change and their existing hazard assessment, psychosocial hazards included, and talk with the people who’d be affected before launch. They will also go back to the assessment after the agent has been running for a while, since some problems only show up in daily use.

5. Leading Indicators Are Becoming the Measure that Matters

Organizations that catch weak signals early avoid a lot of the incidents, shutdowns and regulatory headaches that set others back. API RP 754, the refining and petrochemical industry’s standard for process safety indicators, separates lagging indicators, like loss-of-containment events, from leading indicators, like challenges to safety systems and measures of operating discipline. A weeping relief valve on a line with an overdue inspection is the kind of signal leading indicators are meant to catch, and AI’s biggest contribution may be helping teams act on those signals while there’s still time.

Here’s how the operator’s story could go. She logs the valve, and within the hour the supervisor has her report alongside the overdue inspection and the open MOC. The supervisor, not the agent, decides to pull the valve for testing ahead of schedule, and a week later someone tells her what they found. The next time she sees something off, she writes it down again.

That last part is what I’d measure, because reports processed and admin hours saved show that an agent is working without showing whether anyone is safer. The measures that get closer to that answer are whether safety professionals are spending more time in the field, whether near-miss reports are rising and getting more detailed, whether corrective actions close faster and whether employees say their reports lead to action.

An agent can’t walk the unit or earn a crew’s trust, but it can give the safety team enough time to be out there more often and show people like our operator that a report leads somewhere. For any leader weighing a first agent, the question I’d start with is where your team will spend the time it gives back, and if the answer is “on the unit, with our people,” you’re headed in the right direction.

About the Author

Farzhana Shah

Farzhana Shah

safety & risk specialist

Farzhana Shah is a safety & risk specialist with Cority, a provider of EHS solutions that helps prevent risks across environmental management, employee health, safety, quality, and sustainability.

Sign up for our eNewsletters
Get the latest news and updates

Voice Your Opinion!

To join the conversation, and become an exclusive member of EHS Today, create an account today!